Reset to Defaults

From the Custom Variables (C Var) menu, if you continue scrolling past the last C Var entry, you will reach a screen labelled “reset”. This screen allows you to restore all sensor settings to their factory defaults.

This is useful if many settings or Custom Variables have been adjusted and you want to quickly return the sensor to its original standard behaviour.

Performing a Reset

1. Navigate to the Custom Variables (C Var) menu.
2. Continue scrolling using the Right Arrow until you reach the “reset” screen.
   • The word “reset” will appear without blinking.
3. Press the Up or Down button once — the word “reset” will begin blinking, indicating that the reset function is armed.
4. Press the Set button to confirm.
   • The text “reset” will disappear.
   • The clock symbol will blink for approximately 3 seconds, indicating the reset is in progress.
   • When complete, the sensor will automatically return to the Home Screen.

Cancelling a Reset

If, while “reset” is blinking, you press Left or Right instead of Set, the screen will move back to the previous or next C Var setting, and no reset will be performed.

Notes

• Resetting the sensor restores all user-configurable options (including Global, Still, Video, and Custom Variable settings) to their factory defaults.
• The firmware version remains unchanged.
• After performing a reset, it’s recommended to review your key configuration settings (e.g., wireless channel, mode, and time) before redeploying the sensor.