Set Off Time

The Window Off Time setting defines the time of day when the sensor becomes inactive, marking the end of the period during which motion detection and triggering are enabled.

This setting works together with the Window On Time to establish the daily operating period for the sensor. For example, if you want the sensor to operate only at night, you might set the Window On Time to 18:00 (6:00 p.m.) and the Window Off Time to 06:00 (6:00 a.m.).

Setting the Window Off Time

1. From the Home Screen, press the Right Arrow until you reach the Window Off Time screen.
2. Use the Up or Down buttons to adjust the hour value.
3. Press the Set button to confirm the hour.
4. The minute value will then begin flashing — use the Up or Down buttons to adjust it.
5. Press Set again to save the time.

The time is entered in 24-hour format (00:00 to 23:59).

Notes

• Ensure the Time Windows feature is enabled for this setting to take effect.
• The sensor will remain inactive outside the defined time window.
• If the Off Time is set to the same value as the On Time, the sensor will remain active at all times.
• For reliable operation, confirm that the sensor clock is set correctly before defining time windows (see Set Clock Time section).