# Still Mode Menu Overview

When the sensor is set to <span class="s2">**Still Mode**</span>, pressing the <span class="s2">**right arrow**</span> from the Home Screen will cycle through the following menu screens in order. Each screen allows adjustment of a key parameter controlling how the sensor detects motion and triggers the camera. After the final screen, the menu loops back to the Home Screen.

1. [<span class="s1">**Wireless Channel**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/wireless-channel "Wireless Channel") – Set or disable the wireless transmission channel used to communicate with Camtraptions receivers.
2. [<span class="s1">**Wide Sensor**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/wide-sensor "Wide Sensor") – Control the behaviour and relative sensitivity of the wide-angle PIR sensor.
3. [<span class="s1">**Far Sensor**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/far-sensor "Far Sensor") – Control the behaviour and relative sensitivity of the narrow-field, long-range PIR sensor.
4. [<span class="s1">**Num (Number)**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/still-mode-settings "Still Mode Settings") – Define how many photos the sensor will take per detection (1–6).
5. [<span class="s1">**FPS (Frames Per Second)**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/still-mode-settings "Still Mode Settings") – Set the shooting interval between frames (0.25–3 fps).
6. [<span class="s1">**Gap**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/gap-time "Gap Time") – Specify a retrigger delay between sequences to control how soon the sensor is able to reactivate.
7. [<span class="s1">**Wake**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/wake-time "Wake Time") – Set a wake-up period to give cameras or flashes time to power up before triggering.
8. [<span class="s1">**Set Time**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/set-clock-time "Set Clock Time") – Adjust the sensor’s internal clock for accurate time-based functions.
9. [<span class="s1">**Time Mode**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/enable-time-windows "Enable Time Windows") – Enable or disable time windows that limit when the sensor is active.
10. [<span class="s1">**Set On Time**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/set-on-time "Window On Time") – Define the time of day when the sensor becomes active.
11. [<span class="s1">**Set Off Time**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/set-off-time "Window Off Time") – Define the time of day when the sensor becomes inactive.
12. [<span class="s1">**External Wake**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/external-wake "External Wake") – Schedule periodic half-press pulses to prevent connected equipment from sleeping.
13. [<span class="s1">**Set Mode**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/setting-the-operating-mode-stills-or-video "Setting the Operating Mode (Stills or Video)") – Switch between <span class="s1">**Still**</span> and <span class="s1">**Video**</span> operating modes.

After the <span class="s2">**Set Mode**</span> screen, pressing the <span class="s2">**right arrow**</span> again returns to the <span class="s2">**Home Screen**</span>.