Still Mode Menu Overview

When the sensor is set to  Still Mode , pressing the right arrow from the Home Screen will cycle through the following menu screens in order. Each screen allows adjustment of a key parameter controlling how the sensor detects motion and triggers the camera. After the final screen, the menu loops back to the Home Screen. 

 

 

 Wireless Channel – Set or disable the wireless transmission channel used to communicate with Camtraptions receivers. 

 

 

 Wide Sensor – Control the behaviour and relative sensitivity of the wide-angle PIR sensor. 

 

 

 Far Sensor – Control the behaviour and relative sensitivity of the narrow-field, long-range PIR sensor. 

 

 

 Num (Number) – Define how many photos the sensor will take per detection (1–6). 

 

 

 FPS (Frames Per Second) – Set the shooting interval between frames (0.25–3 fps). 

 

 

 Gap – Specify a retrigger delay between sequences to control how soon the sensor is able to reactivate. 

 

 

 Wake – Set a wake-up period to give cameras or flashes time to power up before triggering. 

 

 

 Set Time – Adjust the sensor’s internal clock for accurate time-based functions. 

 

 

 Time Mode – Enable or disable time windows that limit when the sensor is active. 

 

 

 Set On Time – Define the time of day when the sensor becomes active. 

 

 

 Set Off Time – Define the time of day when the sensor becomes inactive. 

 

 

 External Wake – Schedule periodic half-press pulses to prevent connected equipment from sleeping. 

 

 

 Set Mode – Switch between Still and Video operating modes. 

 

 

 After the Set Mode screen, pressing the right arrow again returns to the Home Screen .