# Video Mode Menu Overview

When the sensor is set to <span class="s1">**Video Mode**</span>, pressing the <span class="s1">**right arrow**</span> from the Home Screen will cycle through the following menu screens in order. Each screen allows configuration of a key parameter controlling how the sensor detects motion and manages video recording. After the final screen, the menu loops back to the Home Screen.

1. [<span class="s1">**Wireless Channel**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/wireless-channel "Wireless Channel") – Set or disable the wireless transmission channel used to communicate with Camtraptions receivers.
2. [<span class="s1">**Wide Sensor**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/wide-sensor "Wide Sensor") – Control the behaviour and relative sensitivity of the wide-angle PIR sensor.
3. [<span class="s1">**Far Sensor**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/far-sensor "Far Sensor") – Control the behaviour and relative sensitivity of the narrow-field, long-range PIR sensor.
4. [<span class="s1">**Time (Recording Length)**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/video-mode-settings "Video Mode Settings") – Define the duration of each video recording following a detection.
5. [<span class="s1">**Gap**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/gap-time "Gap Time") – Set a retrigger delay between recordings to manage how soon the sensor is able to reactivate.
6. [<span class="s1">**Extend Time (EXT)**</span> ](https://docs.camtraptions.com/books/pir-v4-manual/page/video-mode-settings "Video Mode Settings")– Enable or disable Extend Mode. When enabled, motion detected during recording resets the timer, extending the clip until motion stops or the maximum limit is reached.
7. [<span class="s1">**Video Mode (Signal Type)**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/video-mode-settings "Video Mode Settings") – Select the type of control signal used to start and stop video recording, depending on camera brand: *1 Press*, *2 Press*, or *Hold* mode.
8. [<span class="s1">**Wake Time**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/wake-time "Wake Time") – Configure a wake-up period to give cameras time to power up before recording begins.
9. [<span class="s1">**Set Time**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/set-clock-time "Set Clock Time") – Adjust the internal real-time clock to ensure accurate time-based operation.
10. [<span class="s1">**Time Mode**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/enable-time-windows "Enable Time Windows") – Enable or disable time windows that restrict when the sensor is active.
11. [<span class="s1">**Set On Time**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/set-on-time "Set On Time") – Define the time of day when the sensor becomes active.
12. [<span class="s1">**Set Off Time**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/set-off-time "Set Off Time") – Define the time of day when the sensor becomes inactive.
13. [**External Wake**](https://docs.camtraptions.com/books/pir-v4-manual/page/external-wake "External Wake") – Schedule periodic half-press pulses to prevent connected equipment from entering deep sleep.
14. [<span class="s1">**Set Mode**</span>](https://docs.camtraptions.com/books/pir-v4-manual/page/setting-the-operating-mode-stills-or-video "Setting the Operating Mode (Stills or Video)") – Switch between <span class="s1">**Video**</span> and <span class="s1">**Still**</span> operating modes.

After the <span class="s1">**Set Mode**</span> screen, pressing the <span class="s1">**right arrow**</span> again returns to the <span class="s1">**Home Screen**</span>.