Recently Updated Pages

The Lens Heater system consists of: Lens Heater Controller Lens Heater Strip 1. Lens Heate...

The Camtraptions Lens Heater system helps prevent your valuable camera trap images from getting...

The Camtraptions USB Switch is a cable with an integrated controller that allows a 5V power out...

The Camtraptions DC Power Switch is a cable with an integrated controller that allows power to ...

The switch is ON while the press signal is held.

First press turns the switch ON, second press turns the switch OFF. Compatibility For use with: ...

When a press signal is detected, the switch turns ON for 15 seconds then automatically turns OFF ...

Example 1 – Permanent Gentle Heating Scenario: The time is currently 08:33. I want the Lens Heate...

Initial Setup First, connect the USB connector of the Lens Heater Strip into the USB Power Output...

Please read these important safety warnings before using the Lens Heater. Important Safety Warnin...

When this system is being used with the Camtraptions Camera Housing, it is recommended that you u...

Full-press starts recording, second full-press stops recording. How It Works The moment full-pr...

Camera is woken, records for 15 seconds then automatically returns to the powered-down state. Rec...

The switch has an inbuilt cut-out feature that automatically turns it off if it starts to overhea...

The switch is ON while the press signal is held.

First press turns the switch ON, second press turns the switch OFF.CompatibilityFor use with:Camt...

When a press signal is detected, the switch turns ON for 15 seconds then automatically turns OFF ...

De instelling Periodiek Extern Wekken stelt de sensor in staat om met regelmatige tussenpozen een...

Wenn Sie im Menü der benutzerdefinierten Variablen (C Var) über den letzten C-Var-Eintrag hinaus ...

Il Sensore PIR Camtraptions v4 supporta gli aggiornamenti firmware tramite scheda microSD. Questo...