Enable Time Windows

The Time Windows setting allows you to control when the sensor is active during a 24-hour period. When enabled, the sensor will automatically disable itself outside the defined time window, allowing it to operate only during selected hours (for example, nighttime only or daytime only operation).

Enabling or Disabling Time Windows

1. From the Home Screen, press the Right Arrow until you reach the Time Windows screen.

2. Press the Up or Down button to toggle between ON and OFF.

3. Press Set to confirm your choice.

When Time Windows are enabled, a clock icon will appear on the Home Screen, indicating that scheduled operating hours are active.

Notes on Operation

• When Time Windows are ON, the sensor will remain inactive outside the specified time range.

• Currently, only one time window can be defined per 24-hour cycle (for example, limiting operation to daylight or night hours).

• Ensure the internal clock is correctly set before enabling Time Windows (see Set Clock Time section).

• Future firmware updates may introduce the ability to configure multiple time windows.

If multiple time windows would be a valuable feature for your application, please contact Camtraptions for updates or to provide feedback.

An active Time Window may cause the sensor to appear unresponsive. If the sensor does not seem to react to motion, first check whether the clock icon is visible on the Home Screen. If it is, verify that the internal clock and time window settings are correct.