Navigating the Menu

The Camtraptions PIR Sensor v4 features a simple and intuitive menu system that allows you to adjust all key settings directly from the built-in screen and keypad.

When the menu is inactive, the screen will revert to the Home Screen. To access the menu, press the Left or Right buttons to cycle through the available screens. The list of menu screens will differ depending on whether the sensor is set to Still Photo Mode or Video Mode.

Adjusting a Setting

1. Navigate to the desired menu screen using the Left or Right buttons.

2. Press the Up or Down button — the setting’s value will begin to flash.

3. Use the Up or Down buttons to adjust the value to your preference.

4. Press the Set (centre) button to save the change.

If you move to another screen while a value is still flashing (without pressing Set), the change will not be saved.

When you reach the end of the available screens, the menu will loop back to the Home Screen automatically.

Additional (Hold) Functions

Some menu screens have secondary functions that can be accessed by holding the Up or Down buttons. For example:

• Sensor configuration screens (Far / Wide):

  Holding the Up button cycles the sensor mode between Enabled, Disabled, and Wake-Only.

• Wireless Channel screen:

  Holding the Down button disables the wireless transmitter completely, switching the sensor to wired-only operation.

Refer to the individual Settings sections later in this manual for detailed descriptions of each menu screen and the available configuration options.