Set On Time

The Window On Time setting defines the time of day when the sensor becomes active — in other words, the start of the period during which motion detection and triggering are enabled.

This feature works in conjunction with the Time Windows setting. For example, if you wish the sensor to operate only at night, you might set the Window On Time to 18:00 (6:00 p.m.) and the Window Off Time to 06:00 (6:00 a.m.).

Setting the Window On Time

1. From the Home Screen, press the Right Arrow until you reach the Window On Time screen.
2. Use the Up or Down buttons to adjust the hour value.
3. Press the Set button to confirm the hour.
4. The minute value will then begin flashing — use the Up or Down buttons to adjust it.
5. Press Set again to save the time.

The time is entered in 24-hour format (00:00 to 23:59).

Notes

• Ensure the Time Windows feature is enabled for this setting to take effect.
• For reliable operation, confirm that the sensor clock is set accurately before adjusting time windows (see Set Clock Time section).