Wireless Channel

The Wireless Channel menu screen allows you to select which wireless channel the sensor’s built-in transmitter will use to communicate with your Camtraptions Wireless Receiver.

Accessing the Wireless Channel Setting

1. From the Home Screen, press the Right Arrow button until you reach the Wireless Channel screen.
2. Use the Up or Down buttons to change the wireless channel number.
3. Press the Set (centre) button to save your selection.

The selected channel must match the channel set on your Camtraptions Wireless Receiver for proper operation.

Available Channels

The sensor supports 15 wireless channels, numbered 1–15. Each corresponds directly to the same numbered channel on the Camtraptions Wireless Receiver.

Sensitivity[Placeholder: Table showing Wireless Channels 1–15 and their corresponding receiver channel numbers.]

Disabling Wireless Transmission

To disable the wireless transmitter completely (for wired-only operation):

• Press and hold either the Up or Down button for more than [3 seconds] while on the Wireless Channel screen.

The display will show “OFF”, indicating that wireless transmission is disabled.

Wide Lens Behaviour

Far Lens Behaviour

Gap Time

Wake Time

Set Time

Time Mode

Set On Time

Set Off Time

Periodic Wake Signal (note thatIn this onlymode, the sensor will sendonly duringtrigger ONconnected timedevices windows)via the wired output socket.