Still Mode Menu Overview
When the sensor is set to Still Mode, pressing the right arrow from the Home Screen will cycle through the following menu screens in order. Each screen allows adjustment of a key parameter controlling how the sensor detects motion and triggers the camera. After the final screen, the menu loops back to the Home Screen.
-
Wireless Channel – Set or disable the wireless transmission channel used to communicate with Camtraptions receivers.
-
Wide Sensor – Control the behaviour and relative sensitivity of the wide-angle PIR sensor.
-
Far Sensor – Control the behaviour and relative sensitivity of the narrow-field, long-range PIR sensor.
-
Num (Number) – Define how many photos the sensor will take per detection (1–6).
-
FPS (Frames Per Second) – Set the shooting interval between frames (0.25–3 fps).
-
Gap – Specify a retrigger delay between sequences to control how soon the sensor is able to reactivate.
-
Wake – Set a wake-up period to give cameras or flashes time to power up before triggering.
-
Set Time – Adjust the sensor’s internal clock for accurate time-based functions.
-
Time Mode – Enable or disable time windows that limit when the sensor is active.
-
Set On Time – Define the time of day when the sensor becomes active.
-
Set Off Time – Define the time of day when the sensor becomes inactive.
-
External Wake – Schedule periodic half-press pulses to prevent connected equipment from sleeping.
-
Set Mode – Switch between Still and Video operating modes.
After the Set Mode screen, pressing the right arrow again returns to the Home Screen.